Wood stove · Pleasant Hearth

Pleasant Hearth HWS-1200-B 1,800 Sq Ft Wood Stove

Wood stove, up to 1,800 sq ft, 74,000 BTU/h

Heats up to (maker)
1,800 sq ft
Heat output (maker)
74,000
Blower
variable speed blower
Material
Alloy Steel, Cast Iron
Dimensions (seller)
22.75"D x 23.5"W x 32.5"H
Product weight
272 lb
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

In short

Built for heating a small house.

Wins
Heats up to 1,800 sq ft (maker).
Gives ground
Needs a chimney and clearances per the manual.
Suits
Heating a small house.

Updated October 2026

What you get

The Pleasant Hearth HWS-1200-B 1,800 Sq Ft Wood Stove is a wood stove that its maker rates at 74,000 BTU per hour and says heats up to 1,800 square feet.

Treat the 1,800 square feet as the maker's best case for an open, reasonably insulated space. Measure the open area around where it will stand, and check it against the calculator; a heater far bigger than the room ends up run low and smoky.

No power is needed for the fire itself, which is why wood stoves are a common outage backup (the blower won't run without it).

Also on the listing: overall dimensions of 22.75 in (D) x 23.5 in (W) x 32.5 in (H), a shipping or unit weight of 272 lb and alloy steel, cast iron construction.

The figures, from the maker

Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.

Model numberHWS-1200-BRetailer
MaterialAlloy Steel, Cast IronRetailer
Dimensions (seller)22.75"D x 23.5"W x 32.5"HRetailer
Product weight272 lbRetailer
Mounting / installationFreestandingRetailer
Heats up to (maker)1,800 sq ftRetailer
Heat output (maker)74,000Retailer
Blowervariable speed blowerRetailer

Is it the right heater for the room?

Pick it when

  • Heating a small house
  • Homes with a wood supply
  • Heat during power cuts

Pass on it when

  • Homes without room for a chimney or chimney pipe
  • Owners who want thermostat control

Where it wins, where it gives ground

Wins

  • Heats up to 1,800 sq ft (maker)
  • 74,000 BTU/h output
  • Works without electricity

Gives ground

  • Needs a chimney and clearances per the manual
  • Burns best on dry wood only
  • Hand loading every few hours

Know before you install

  • Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.

Heaters to weigh against it

Other wood stoves and inserts in the same heat range

Every wood stoves and inserts on one chart · All Pleasant Hearth models listed

Buying this model

The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions about this model

How big an area does the Pleasant Hearth HWS-1200-B 1,800 Sq Ft Wood Stove heat?
The maker says up to 1,800 square feet. Treat that as a ceiling for an open, insulated space and measure the area around the stove.
Does the Pleasant Hearth HWS-1200-B 1,800 Sq Ft Wood Stove need electricity?
Not to burn. Its blower needs power, so it runs without the fan in an outage.

Bottom line

Built for heating a small house.