What you get
The ORALNER HR-11287 30-Inch Electric Fireplace Insert is an electric insert with a 1,500-watt heater, which works out to about 5,118 BTU per hour (3.412 BTU per watt).
At 1,500 watts it uses about 1.5 kWh an hour on high and draws 12.5 amps at 120 volts; keep it on a circuit without other big loads. Price it at your electricity rate.
The maker says it heats up to 1,000 square feet; as with any 120-volt heater, read that as supplemental heat for one room.
Like most electric fireplaces the flame effect can run with the heater off, using far less power.
As an insert it slides into an existing fireplace opening; measure the opening width, height and depth against the body dimensions, and the face against the trim. How to measure.
Electric fireplaces burn nothing, so they produce no carbon monoxide and need no vent, chimney or gas line.
Also on the listing: overall dimensions of 9 in (D) x 30 in (W) x 14 in (H), a shipping or unit weight of 23 lb and metal construction.
The figures, from the maker
Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.
| Model number | HR-11287 | Retailer |
|---|---|---|
| Power | Corded Electric | Retailer |
| Dimensions (seller) | 9"D x 30"W x 14"H | Retailer |
| Material | Metal | Retailer |
| Mounting / installation | Built in | Retailer |
| Heat output (maker) | 5,120 BTU/h | Retailer |
| Features (seller) | Adjustable Flame, Compatible with Alexa, Remote Control & 8H Timer, Safety Shut Off | Retailer |
| Batteries | 2 AAA batteries required. | Retailer |
| Product weight | 23 lb | Retailer |
| Model name | Electric Log Set | Retailer |
| Heats up to (maker) | 1,000 sq ft | Retailer |
| Wattage | 1,500 W | Retailer |
| Thermostat | built-in thermostat | Retailer |
Is it the right heater for the room?
Pick it when
- Converting an unused fireplace
- Rooms where gas or wood can't go
Pass on it when
- Heating a whole house
- Circuits already near their limit
Where it wins, where it gives ground
Wins
- 5,118 BTU/h of heat
- No vent or chimney
- Flame runs without heat
Gives ground
- Supplemental heat only
- Draws 12.5 A on high
Know before you install
- Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.
Heaters to weigh against it
Other electric fireplaces and stoves in the same heat range
Buying this model
The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions about this model
How much heat does the ORALNER HR-11287 30-Inch Electric Fireplace Insert give?
Can the ORALNER HR-11287 30-Inch Electric Fireplace Insert share a circuit?
Bottom line
Best suited to converting an unused fireplace.