What you get
The Innoflame PD20-20 21-Inch Electric Log Set is an electric log set with a 1,400-watt heater, which works out to about 4,777 BTU per hour (3.412 BTU per watt).
On a 120-volt outlet that draws about 11.7 amps, most of a standard 15-amp circuit, so other loads on the circuit can trip the breaker. Plug it straight into the wall as the manual directs.
The maker says it heats up to 400 square feet; as with any 120-volt heater, read that as supplemental heat for one room.
The listing states 4 flame settings, and like most electric fireplaces the flame can run with the heat off.
As a log set it sits in an open fireplace in place of a grate; plan the cord route to an outlet.
No combustion means no venting, no gas line and no carbon monoxide, which is why they go into bedrooms and apartments.
Also on the listing: overall dimensions of 8.5 in (D) x 20.5 in (W) x 11.7 in (H), a shipping or unit weight of 11 lb and metal construction.
Warranty, per the listing: 1 year manufacuturer.
The figures, from the maker
Each figure is the maker's or the listing's own, with its source marked. A figure the maker doesn't give is shown as not stated.
| Model number | PD20-20 | Retailer |
|---|---|---|
| Power | Corded Electric | Retailer |
| Dimensions (seller) | 8.5"D x 20.5"W x 11.7"H | Retailer |
| Material | Metal | Retailer |
| Mounting / installation | Freestanding | Retailer |
| Features (seller) | Adjustable Thermostat, Flame Effect, Overheat Protection, Safety Shut Off, Timer | Retailer |
| Batteries | 2 AAA batteries required. | Retailer |
| Product weight | 11 lb | Retailer |
| Model name | PD20-20 | Retailer |
| Warranty | 1 year manufacuturer. | Retailer |
| Heats up to (maker) | 400 sq ft | Retailer |
| Wattage | 1,400 W | Retailer |
| Voltage | 120v | Retailer |
| Flame effects | 4 | Retailer |
| Thermostat | built-in thermostat | Retailer |
Is it the right heater for the room?
Pick it when
- Filling an open fireplace
- Rooms where gas or wood can't go
Pass on it when
- Heating a whole house
- Circuits already near their limit
Where it wins, where it gives ground
Wins
- 4,777 BTU/h of heat
- No vent or chimney
- Flame runs without heat
- 4 flame settings
Gives ground
- Supplemental heat only
- Draws 11.7 A on high
Know before you install
- Figures are the maker's own and are rated in the maker's conditions. Installation, venting, chimney, gas and electrical work follow the manual and local code, carried out by a qualified installer.
Heaters to weigh against it
Other electric fireplaces and stoves in the same heat range
Buying this model
The button opens this exact model's listing. Prices and stock change, and installation parts are usually sold separately; check the box contents and the manual's venting list before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure
Questions about this model
How much heat does the Innoflame PD20-20 21-Inch Electric Log Set give?
Can the Innoflame PD20-20 21-Inch Electric Log Set share a circuit?
Bottom line
Best suited to filling an open fireplace.